Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Wells Branch, TX
Most chimney work in Wells Branch comes down to one thing: the houses here were built with factory-made fireplaces, not mason-built chimneys, and 40-plus years later those prefab units need attention. We’re Ashby Chimney Austin, and we handle sweeps, inspections, and repairs for these specific systems. Nathan Corliss leads our team, and every job gets a written price before work starts. Call (254) 274-4486 if you’re looking at a fireplace that hasn’t been touched since the Reagan administration.
Why Wells Branch Homes Are Different
Wells Branch grew fast in the 1970s and 1980s, which means rows of wood-frame tract homes with zero-clearance fireplaces and thin metal flues. These aren’t the masonry chimneys you see in older Texas towns. A prefab flue needs different brushes, different techniques, and a sweep who knows not to gouge the metal liner. We see plenty that have never been properly cleaned at all.
The climate shapes the work too. Wells Branch summers are humid, and that moisture works on metal chimney parts all year. Rust on caps, corroded flashing, pitted flue liners – those show up more often here than creosote ever does. Fireplaces are used for the occasional cool evening, not whole-winter heating, so the soot load stays light while the corrosion risk stays steady. The ice storms that roll through every few years also crack chimney caps and shift crowns. This isn’t heavy-creosote country. It’s aging-equipment country.
Styles & brands we work with
Our Main Wells Branch Services
Wells Branch homeowners call us most about three things: getting a prefab fireplace cleaned safely, finding out whether it’s still safe to use, and fixing what’s broken once we look inside.
Chimney Sweep in Wells Branch
A sweep in Wells Branch usually means working on a zero-clearance factory unit with a metal flue, which takes special poly brushes so thin liners aren’t scratched or dented. We also remove the rust scale and debris that humidity leaves behind. Most homes here go years between cleanings, so first visits often turn up more than ash. Our Chimney Sweep in Wells Branch page covers what a sweep includes and what it costs here.
Chimney Inspection in Wells Branch
If you’re buying or selling a Wells Branch home, the inspector’s report probably has a note about the fireplace. Prefab units from the 70s and 80s often fail clearance checks or show flue damage, and the only way to know is a camera run. Our Chimney Inspection in Wells Branch page explains the levels of inspection and what we document with photos.
Fireplace Repair in Wells Branch
Rust-thinned flue liners, warped caps, cracked refractory panels – these are the usual repair calls in Wells Branch. Many of these units were installed when the homes were built and haven’t been opened for service since. Our Fireplace Repair in Wells Branch page walks through common prefab fireplace repairs and what they cost in this area.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Wells Branch
We work on and repair most major prefab brands found in Wells Branch, including HeatShield, Gelco, and Olympia Chimney systems. We stock common parts for these units and can source the rest quickly through our supply network. See our brands page for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Wells Branch, TX
| Service | Typical range in Wells Branch |
|---|---|
| Standard chimney sweep | $189 – $289 |
| Prefab / factory-built fireplace sweep | $229 – $329 |
| Level 1 inspection | $150 – $250 |
| Level 2 inspection (camera) | $325 – $500 |
| Flue cap replacement | $150 – $350 installed |
| Chimney crown repair | $400 – $800 |
| Fireplace refractory panel replacement | $350 – $700 |
| Glue-on flue tile resurfacing | $900 – $1,500 |
| Stainless steel liner installation | $2,500 – $5,000 |
Prices in Wells Branch push toward the higher end when the unit is a prefab with rusted internal parts, which is common. Obstructions, animal nests, or deteriorated framing also add labor. Every job gets a written price before any work begins, and that number doesn’t change at the door.
Neighborhoods We Serve in Wells Branch
We cover all of Wells Branch, including the townhome clusters and single-family streets throughout the 78728 ZIP. Our techs are typically in the area within one to three business days for non-emergency work, depending on the season.
- Wells Branch proper
- Wells Point
- Willow Run
- Scofield Farms
- Preston Village
Service Area – Cities Near Wells Branch
Beyond Wells Branch, our crews handle chimney work across the north Austin metro. We regularly serve Austin, TX, Round Rock, TX, and Georgetown, TX, along with Kyle, TX to the south. If you’re on the edge of Wells Branch, call (254) 274-4486 and we’ll tell you straight whether you’re in our route area.
Serving Wells Branch, TX - Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Wells Branch
Most Wells Branch appointments are scheduled within one to three business days. We coordinate scheduling from our Austin office, and the 24-hour phone line is always answered by a live person, so you can reach us evenings and weekends, not just during business hours.
Most chimney sweeps, inspections, and interior repairs don’t require HOA approval in Wells Branch. Exterior changes such as a new cap or crown repair rarely trigger review either, but a few associations have architectural guidelines. We’ll let you know if the work might need a quick check, but it’s uncommon.
Yes. A Level 2 camera inspection is what homebuyers in Wells Branch need most, especially on houses from the 1970s and 1980s where the fireplace has never been evaluated. You get photos and a written report, not just a verbal summary. Call (254) 274-4486 for a free estimate.
If you’re in Wells Branch and have questions about your fireplace, call (254) 274-4486. We’ll answer, give you a straight price over the phone when possible, and put every estimate in writing before we touch the flue.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wells Branch Customers Say
"Annual cleaning. Drop cloth down, vacuum running, hearth spotless after. No pressure to buy a cap or anything extra. Just did what I booked and charged the quote."
- Keith Donovan"We smelled something off every time the heat kicked on. Turned out to be debris in the flue. He cleared it and the smell was gone. Patient explaining it all to a first timer like me."
- Annette Prosser"The damper was rusted shut and we couldn't use the fireplace. He freed it up, swept everything, and now we actually use the thing. Priced it before he started."
- Georgia Lemmon