Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Kyle
If you live in Kyle and you’re searching for a chimney sweep, you’re probably wondering two things: what it costs and whether the person showing up will actually know what they’re doing. A standard chimney sweep in Kyle runs $189 to $329, depending on the fireplace type and what’s built up inside. We’ve served Kyle homeowners since 2002, and our crews know the difference between a 2006 Plum Creek prefab unit and a 1970s masonry chimney near downtown. Call (254) 274-4486 and a live person answers, day or night.
Kyle’s growth from a small railroad town into a sprawling suburb changed what chimney work looks like here. Most homes in the newer subdivisions off I-35 don’t have traditional fireplaces at all. They have direct-vent gas units with no flue to brush. So when a Kyle homeowner calls for a sweep, the actual job is often a blocked vent, a failed ignition, or a bird’s nest crammed into the termination cap. That’s the work we do most days in Kyle, and we’d rather tell you that on the phone than waste your time booking a brush-and-vacuum service you don’t need.
Why Ashby Chimney Austin Is Kyle’s Preferred Chimney Sweep Company
Kyle homeowners call us because we answer the phone and we show up when we say we will. That sounds basic, but in a city where new residents move in every week and old contractors overbook the moment temperatures drop, it’s the thing people mention first. Nathan Corliss built this company on a simple rule: say the price, put it in writing, and come back if the work doesn’t hold.
Our Chimney Sweep team has worked in Kyle neighborhoods including Plum Creek, Waterleaf, and the historic district near Center Street. We know the housing stock. A 2007 stone-veneer home off Kohlers Crossing has a different chimney system than a 1980s brick house near Lehman High School. That matters when we quote a price because the right service protects the right part.
Every Kyle job gets a written price before any work starts. That number doesn’t change at the door. Every repair gets a written guarantee. If a covered repair fails inside a year, we return free under our 365-Day Done Right Promise. No fine print. No call center. Just the same person walking you through what we found.
Styles & brands we work with
Fireplace Cleaning in Kyle
Fireplace Cleaning in Kyle usually means one of two jobs: a traditional sweep of a masonry or prefab wood-burning fireplace, or a vent-and-glass cleaning on a direct-vent gas unit. In a wood-burning fireplace, we remove soot and creosote from the firebox, smoke chamber, damper, and flue, then leave the firebox clean enough that you could inspect it with a flashlight. For gas fireplaces, the work is different: we clean the glass, check the burner, verify the vent termination is clear, and confirm the pilot and ignition are working. Fireplace cleaning in Kyle runs $149 to $249 for standard units.
Most Kyle homes benefit from fireplace cleaning before the first winter cold snap, which here usually arrives in late November or December. When a fireplace has sat unused through a long, humid Kyle summer, a lot can move in: wasps, mud daubers, dust, and in some neighborhoods, chimney swifts. A quick visual check before you light it can prevent a smoke-filled living room.
Gas Fireplace Vent and Glass Service
If you have a direct-vent gas fireplace in Kyle, you may never need a traditional sweep. But the vent can clog with debris, and the glass can cloud with white mineral film from the unit’s combustion process. We clean the glass, clear the vent termination, test the switch or remote, and verify the burner flame looks right. This runs $119 to $189 for most Kyle units.
Soot and Creosote Removal
Even in Kyle where fireplaces burn rarely, soot accumulates. It’s not always dramatic, but it can stain the firebox and coat the damper. Creosote, the tar-like byproduct of wood smoke, builds in stages. First-degree creosote is flaky and gray. Third-degree is a hard, shiny glaze that can fuel a chimney fire. We remove what’s there, tell you honestly if it’s a routine cleaning or something worse.
Chimney Services in Kyle
Chimney Services in Kyle cover the structural side: inspections, caps, dampers, flashing, and flue liners. A Level 1 inspection is the standard check we run during a sweep. A Level 2 inspection goes further, usually with a camera, and is what we recommend when you buy a house in Kyle or when a real estate transaction requires it. A basic Level 1 runs $89 to $129 as an add-on to a sweep. A full Level 2 starts at $249.
Kyle’s building boom created a specific problem. Homes built between 2000 and 2015 often have prefabricated metal flue liners that look fine from the outside but corrode from condensation during humid off-season months. When we inspect those liners with a camera, we sometimes find rust through the seams inside five years of install. That’s a repair, not a cleaning, and it’s why a quick Level 1 glance isn’t always enough.
Chimney Crown and Flashing Repair
The crown is the concrete cap at the top of the chimney. In Kyle, the hot-humid summers and occasional hard freezes cause hairline cracks that widen over time. Water gets in, freezes, and spalls the masonry. We repair crowns and replace flashing so water stays outside where it belongs. Crown repairs in Kyle run $350 to $700, depending on size and access.
Level 2 Inspection with Camera
A Level 2 inspection uses a video camera to look inside the flue from the firebox to the cap. We use it after a chimney fire, before a liner repair, during a home purchase, and when something isn’t drafting right and we can’t see why from the roof. The camera doesn’t lie. We’ll show you the footage and you can see exactly what we see.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kyle
We stock and install parts from HeatShield, Gelco, and Famco, which means a Kyle chimney repair isn’t delayed while someone hunts for a part. HeatShield is a ceramic resurfacing system we use to repair cracked flue tiles without tearing out the chimney. Gelco caps and dampers hold up to Texas sun and rain. When we quote a repair, you’ll know the brand, the part, and the price before the work starts. Most common parts are in the van when we arrive in Kyle.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Kyle Homes
- Corroded prefab metal liners. Homes built during Kyle’s 2000-2015 growth boom often have metal flue liners that rust from humid off-season condensation. We see pinholes and seam failure inside ten years. A camera inspection catches this before smoke leaks into the house.
- Bird and wasp nests in unused vents. Kyle’s warm months invite swifts, starlings, and mud daubers into vent terminations. When a homeowner fires the unit on the first cold snap, the nest gets pushed into the vent, blocking it and causing flame rollout. We clear the vent and install a proper termination guard.
- Shared flue backdraft in townhomes. In attached Kyle housing, a neighbor’s appliance venting into a shared stack can push exhaust back into your fireplace. We saw this in Plum Creek where a newly installed gas water heater cross-connected into a shared masonry stack, tripping a carbon monoxide detector. We isolated the flue and installed a dedicated liner.
- Cracked crowns on younger homes. A Kyle house built in 2018 shouldn’t have a cracked chimney crown, but many do. The flat, monolithic pours and fast construction cycles mean thin concrete and poor curing. The first hard freeze after a wet fall pops the surface open. We repair it before water migrates into the chase.
Pricing for Chimney Sweep in Kyle, TX
Here’s what you’ll actually pay for common Chimney Sweep in Kyle services. A standard wood-burning fireplace sweep runs $189 to $289. That includes the firebox, smoke chamber, damper, and flue, with the area protected from dust. A gas fireplace service runs $119 to $189. A Level 1 inspection as an add-on is $89 to $129. A Level 2 camera inspection starts at $249. Crown repairs run $350 to $700. If you need a liner resurfaced with HeatShield, that starts around $1,200 and goes up with height and access. Every quote is written and free, so you’ll know the exact number before anything starts. Call (254) 274-4486 for a free estimate.
What changes the price? Access matters. A two-story home off I-35 with a steep pitch takes longer than a single-story ranch on Goforth Road. If there’s an animal nest or heavy creosote, the cleaning takes longer. But the quote you get is the price you pay. No door-day surprises.
We Also Serve Cities Near Kyle
We regularly take calls from homeowners in Buda just up I-35, north into Austin, and east to Manor and Pflugerville. If you’re in one of those areas, the same written pricing and guarantee apply. Kyle is our core, but the crews cover the surrounding corridor daily.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Kyle
No, a direct-vent gas fireplace doesn’t need a traditional brush-and-vacuum sweep because there’s no flue that accumulates creosote. What it needs is a vent-clearing and inspection: we clean the glass, clear the termination cap of debris, test the ignition, and verify the burner flame. In Kyle, this is often what “chimney sweep” actually means. Most gas fireplace services run $119 to $189. Call (254) 274-4486 if yours hasn’t been checked in over a year.
It can push exhaust back into your home. In a shared masonry stack, two or more flues run side by side. If a neighbor’s gas appliance vents into the same stack and the flues aren’t properly separated, their exhaust can backdraft into your unused fireplace, leaving soot and potentially carbon monoxide in your living room. In Plum Creek, we saw this exact issue: a new gas water heater cross-connected into a shared stack and tripped the homeowner’s CO detector. We isolated the flue with a dedicated liner and top-sealing damper. If you smell exhaust or see soot in a fireplace you never use, call us. This is not a cleaning issue; it’s a safety issue.
Kyle’s hot, humid summers followed by winter freezes stress young concrete crowns that were poured thin or cured poorly during fast construction. The crown on a 2018 home is often a flat, monolithic pour without proper expansion joints. When water soaks in and a hard freeze hits, the surface pops. We repair crowns in Kyle for $350 to $700, depending on size. The fix is straightforward: remove the damaged concrete, pour a proper crown with overhang and a drip edge, and seal it. Water is the enemy of every chimney, and a cracked crown lets it straight in.
Third-degree creosote is a hard, shiny tar glaze that forms when fires burn inefficiently at low temperatures. In Kyle, where fireplaces get used a few times a year for ambience rather than heat, creosote build-up is usually light. But if you burn unseasoned wood or close the damper too soon, third-degree creosote can form quickly in a single season. It’s the most dangerous type because it burns hot and fast. The good news: in most Kyle homes, a standard sweep catches creosote before it reaches that stage. If we find third-degree creosote, we’ll tell you honestly whether a chemical treatment or removal is needed, and what it costs.
Yes, especially in Kyle. A Level 2 inspection with a camera looks inside the flue and catches problems the home inspector didn’t. Given how many Kyle homes built between 2000 and 2015 have prefabricated metal liners that corrode from humid off-season condensation, a camera inspection is the only way to know if the liner is sound. We’ve found rusted-through seams on homes that looked perfect from the outside. A Level 2 starts at $249. When you’re already spending hundreds of thousands on a house, that’s cheap insurance. Call (254) 274-4486 and we’ll schedule it before you close.
If you’re in Kyle and need a chimney sweep, fireplace cleaning, or an honest inspection, call (254) 274-4486. A live person picks up. You’ll get a written price, a real arrival window, and work that stands behind itself. That’s the way Nathan Corliss runs it. That’s the Kingswell Way.
Written by Nathan Corliss, Owner at Ashby Chimney Austin, serving Kyle since 2002.