Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Kyle
Fireplace repair in Kyle, TX doesn’t usually mean what people expect. Most homes in this city were built in the last 20 years, and their fireplaces are direct-vent gas units, not old masonry stacks. That means the most common repair calls we get from Kyle homeowners involve blocked vents, faulty ignitions, pilot lights that won’t stay lit, and glass doors that won’t seal. We diagnose these issues quickly and show you camera evidence before any work is recommended. If your fireplace is acting up in Kyle, call (254) 274-4486 and we’ll get a technician out to your neighborhood.
Why Ashby Chimney Austin Is Kyle’s Preferred Fireplace Repair Company
We’ve worked on fireplaces all over Kyle, from the newer subdivisions west of I-35 to the older brick homes near downtown. Homeowners here tend to call us after a bad experience with another company: a technician who never showed, a quote that changed at the door, or a repair that failed within weeks. Our answer to that is the Kingswell Guarantee and the way we work under it. Say the price before work starts. Show up in the window we promised. Leave the fireplace cleaner than we found it. Put the guarantee in writing. Come back if the repair fails. That’s the Kingswell Way, and it applies to every call we run in Kyle.
Nathan Corliss runs this location. He’s the one accountable for making sure the written price matches the invoice and the repair actually holds. Every job gets a written guarantee on completion, and if a covered repair fails inside the guarantee period, we return at no charge. That’s the 365-Day Done Right Promise. No fine print, no add-on fee for the paperwork.
Our phones are answered by a live person 24 hours a day. No voicemail loops, no callback forms. When you call (254) 274-4486 from Kyle, you talk to a human being who can schedule your repair.
Styles & brands we work with
Gas Fireplace Maintenance in Kyle
Gas Fireplace Maintenance in Kyle is the service most homeowners here actually need but don’t know to schedule. A direct-vent gas fireplace doesn’t burn wood, so there’s no creosote to sweep. But the vent termination on the exterior wall can get blocked by bird nests, wasp nests, leaves, or construction debris, and when that happens the unit shuts down or refuses to light. The burners get coated with dust and the pilot assembly gets corroded from humidity, especially in Kyle’s climate. Annual maintenance catches these things before the first cold snap. Most gas fireplace maintenance calls in Kyle run between $129 and $229, depending on what the unit needs.
What a Maintenance Visit Includes
We pull the glass, vacuum the firebox, inspect the burner and pilot assembly, check the thermocouple and thermopile, and confirm the vent termination is clear. We run a smoke test to verify proper draft. Then we show you photos of anything we found. If no repair is needed, we say so. That’s the whole job.
When Kyle Homeowners Should Schedule It
Book it before burning season, usually October or early November in Kyle. If you smell a dusty odor the first time you fire up the unit each winter, that’s normal dust burning off, but a persistent gas smell or a pilot that won’t stay lit is a repair issue. Don’t wait until the first cold snap to find out the vent is blocked.
Wood Stove Installation in Kyle
Wood Stove Installation in Kyle is a growing request from homeowners who want a real heat source when the power goes out during winter storms. Many Kyle homes, especially older ones near downtown, have masonry fireplaces that were never designed for efficient wood burning. Installing a wood stove means running a properly sized stainless steel liner through the existing chimney, connecting the stove, and confirming the whole system drafts correctly. Here’s the local reality: older masonry chimneys in Kyle were often built without clay tile liners or with mortar joints that spall after decades of Texas humidity swings. That’s a safety problem, not just a performance problem.
Liner and Appliance Installation
We install stainless steel liners from Olympia Chimney and Copperfield because they’re built for the heat output of a wood stove. The liner is sized to the appliance, not the other way around. If the existing fireplace and flue can’t safely handle the stove, we’ll tell you plainly and show you the camera footage that explains why.
Kyle Building Code and Clearances
Kyle follows Texas and national fire code for wood stove clearances to combustible materials. The stove, the liner, the hearth, and the floor protection all have to meet specific measurements. We handle the technical side, but you should know installation here often costs between $1,800 and $3,400 for a typical liner-plus-connect job. We give you a written price before any work begins.
Trusted Brands We Service in Kyle
We service and install fireplaces from the major brands Kyle homeowners actually have in their homes: Heat & Glo, Majestic, Monessen, Napoleon, Kozy Heat, and Enviro, among others. For parts, we order from chimney-trade suppliers like Olympia Chimney, Copperfield, and Famco, not from whatever happens to be on the shelf at a big-box store. We stock common replacement parts for gas valves, thermopiles, and glass assemblies so most Kyle repairs don’t require a second visit. If the part has to be ordered, we tell you that up front and give you a real timeline.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Kyle Homes
- Blocked direct-vent terminations: In Kyle’s newer subdivisions like Plum Creek and Waterleaf, birds build nests in the exterior vent caps. The unit shuts down or the pilot won’t stay lit. We clear it and install a proper vent screen.
- Spalling mortar and cracked crowns on older chimneys: Homes near downtown Kyle built with traditional masonry chimneys show mortar deterioration from years of Central Texas humidity swings and hard rain. A camera inspection tells us whether it’s cosmetic or structural before we recommend anything.
- Gas valves and pilot assemblies that fail after years of disuse: A fireplace that sits idle from March to November in Kyle’s hot, humid climate can develop corroded connections and sticky valves. When the first cold snap hits, the unit won’t light or shuts off after a few minutes.
- Odors and backdrafting in tightly sealed new construction: Kyle’s newer homes are built tight for energy efficiency. A fireplace pulling combustion air from inside the house can backdraft if the damper was left closed, a window is cracked, or a vent is blocked. We diagnose the cause with a smoke test and camera, then fix it.
Pricing for Fireplace Repair in Kyle, TX
Here’s what you’re actually looking at for fireplace repair in Kyle. A standard gas fireplace service call with diagnosis runs $89 to $129. Common repairs like thermopile replacement, pilot assembly replacement, or vent clearing typically run $149 to $289. Gas valve replacement runs $329 to $499 with the part. A full fireplace insert service or a wood stove liner installation runs $1,800 to $3,400 depending on the liner length and appliance type. These are the ranges we quote in Kyle, and the written price you receive before work starts is the price you pay. No surprise add-ons. Call (254) 274-4486 for a free estimate.
We Also Serve Cities Near Kyle
Our technicians run service calls to Kyle and the surrounding communities regularly. If you’re in Buda, Austin, Manor, or Pflugerville, we can schedule a fireplace repair with the same written-price and written-guarantee approach. For a broader look at the work we do, visit our Fireplace Repair page, or see how we serve Fireplace Repair in Kyle specifically.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Kyle
Yes, you do. The vent termination on the outside of your Kyle home is the weak point. Birds, wasps, leaves, and construction debris block it while the fireplace sits unused, and a blocked vent means carbon monoxide or combustion gases can’t escape. Even if you never light the fire, an annual check costs between $129 and $229 and takes about an hour. We also inspect the gas line connections and the glass seal. If you go three or four years without service in Kyle’s climate, you’re risking a shutdown on the first cold night you actually want a fire. Schedule it before burning season. Call (254) 274-4486.
Blocked vent terminations and construction dust. In developments like Plum Creek and Waterleaf, the fireplaces were installed during construction, and drywall dust, paint overspray, and construction debris settle inside the firebox and vent. Then birds build nests in the vent cap. The homeowner turns the fireplace on for the first time in November and it shuts off after a few minutes, or won’t light at all. We pull the glass, clean the debris, clear the vent, and confirm proper draft. Most of these calls need no new parts, just a real cleaning and inspection. If you’re in a Kyle subdivision built after 2015, assume the unit was never cleaned after construction.
Yes. Spalling mortar and cracked crowns on masonry chimneys near downtown Kyle are often caused by decades of Central Texas humidity, rain, and heat. The fix is repointing the mortar joints when the spalling is surface-level, or rebuilding the crown if it’s cracked enough to let water into the chimney structure. We do not recommend masonry work without first running a camera inspection so you can see the damage yourself. The cost depends on access and the amount of mortar repair, but crown work near Kyle typically runs $400 to $900. Call (254) 274-4486 for a camera inspection and an exact written price.
Yes, we install wood stoves in Kyle homes and the first step is always a camera inspection of the existing flue. Many older chimneys near downtown Kyle were built without clay tile liners, or the clay tiles have cracked after years of heat and humidity. You can’t safely run a wood stove through a damaged or unlined flue. We install a properly sized stainless steel liner, connect the stove, and verify draft with a smoke test. The full job in Kyle typically runs $1,800 to $3,400. If the existing chimney can’t handle a stove safely, we’ll show you the camera footage and tell you exactly why before any work starts.
Usually it’s dust, but sometimes it’s more serious. A dusty, burning smell the first time you light a gas fireplace in Kyle is normal and clears within an hour. A persistent rotten-egg or gas smell is not normal and means a gas leak somewhere in the line or at a connection. If the smell persists after the unit has been running for an hour, shut it off and call us at (254) 274-4486. We’ll check the gas connections, the valve, and the vent termination. Getting it checked takes about an hour and costs the standard service-call rate. Don’t ignore a gas smell.
We handle fireplace repair across Kyle, from direct-vent gas units in the newer subdivisions to masonry chimneys near downtown. Every job gets a written price before work starts, camera evidence of anything we find, and a written guarantee on the repair. If you need a fireplace fixed in Kyle, call (254) 274-4486 and talk to a live person who can get you scheduled.
Written by Nathan Corliss, Owner at Ashby Chimney Austin, serving Kyle and the surrounding communities.