Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Georgetown
Fireplace repair in Georgetown usually runs between $180 and $1,400 depending on what’s wrong, and most jobs are completed in a single visit. We work on gas fireplaces, wood-burning units, inserts, dampers, fireboxes, and pilot assemblies all over Georgetown, from Old Town to Sun City and the newer subdivisions west of I-35. If your fireplace is smoking, won’t light, or has a damper that won’t close, call us at (254) 274-4486 and we’ll tell you what we think it is before we even schedule the visit.
We’re not guessing when we say that. Our Fireplace Repair team has spent enough time inside Georgetown chimneys to know the difference between a five-minute pilot fix and a firebox that’s failing at the mortar joints. You’ll get a written price before any work starts, and a written guarantee when we finish. That’s just how we operate.
Why Ashby Chimney Austin Is Georgetown’s Preferred Fireplace Repair Company
We’ve been in business since 2002, and the Georgetown homes we work in today include limestone Victorians near the courthouse, brick ranch houses off Williams Drive, and newer builds in Berry Creek and Serenada. That range matters because a prefabricated flue in a 2015 home needs nothing like the care that a 1920s limestone stack requires. Our technicians know which one they’re looking at before they step out of the truck.
Every Georgetown job gets the same treatment from Nathan Corliss and his team: a background-checked, uniformed technician, a written estimate handed over before any tool comes out, and a phone answered by a live person any time you call. Dispatch and scheduling are coordinated from the brand’s Austin office, but the crews serving Georgetown know Georgetown. They know Church Street, they know the Old Town alleys, and they know how to get a ladder truck down a narrow side street without scraping a limestone curb.
We carry materials from recognized chimney-trade suppliers like HeatShield, Gelco, and Olympia Chimney, so when a Georgetown firebox needs a new panel or a resurfaced smoke chamber, the right product is already on the truck, not “on order.” The Kingswell Guarantee backs every repair in writing. If a covered repair fails inside the guarantee period, we come back and correct it at no charge. That’s the 365-Day Done Right Promise, and it applies to every single job we do in Georgetown.
Styles & brands we work with





Gas Fireplace Repair in Georgetown
Gas Fireplace Repair in Georgetown typically costs between $200 and $600 for most jobs, and what you’re really paying for is diagnosis time plus the part that failed. Most gas fireplace issues in Georgetown homes trace back to a handful of culprits: a thermocouple that quit reading the pilot flame, a gas valve that won’t stay open, a wiring connection that loosened over a hot summer in the attic chase, or a burner that’s so dust-clogged from months of disuse that the flame pattern looks like a candle instead of a ribbon. Georgetown’s long stretches between burns, hot summers followed by mild winters, are hard on gas fireplaces that sit unused for eight or nine months.
Pilot and Ignition Diagnosis
When a Georgetown homeowner calls and says “the fireplace won’t light,” the first thing we check is whether the pilot assembly is producing a clean blue flame or a weak yellow one. A dusty pilot tube, a failing thermopile, or a gas pressure issue at the valve are all common here. We’ll quote you the specific fix before we start, not a vague “tune-up” price that balloons after we open the panel.
Venting and Draft Problems
Gas fireplaces in Georgetown’s older homes often share ventilation paths with other appliances, and that’s where we see trouble. A direct-vent unit that’s losing its seal at the termination cap, a B-vent that’s been knocked loose in an attic, or a vent run that’s sagging can all pull air backward. The symptom is usually a smokey smell when the unit first fires, or a glass front that fogs immediately. We pressure-test the vent run and show you exactly what we found, with photos, before we ask for approval to fix it.
Gas Fireplace Service in Georgetown
Gas Fireplace Service in Georgetown runs $160 to $280 for a standard cleaning and inspection, and it’s worth doing every year if you use the fireplace even occasionally. Service is different from repair: service is preventive. We pull the glass, clean the burner pan, vacuum the logs or fire glass, check the gas connections at every joint, test the pilot assembly under load, verify the venting, and run the unit through a full cycle while we watch. In Georgetown’s climate, where a fireplace might sit unused from April through November, that annual check catches the small things before they become a $600 repair call on the first cold night of December.
Seasonal Readiness Checks
Georgetown homeowners who call us in October get a different experience than the ones who wait until the first freeze. The October call is a service visit: we clean, test, adjust, and hand you a written report with photos. The December call is still serviceable, but we’re often finding that summer humidity has dulled burner ports or that a spider has nested in the venturi, and we’re fixing those during the same visit. Either way, you get the same written price and the same guarantee.
Old Town and Historic Home Care
Gas fireplace service in Georgetown’s historic districts requires a lighter touch on the stonework, but the gas components still get the full treatment. We’re careful with the original limestone surrounds on Church Street and in the neighborhoods around Southwestern University, and we use low-vibration tools when we’re working near soft stone. The gas log set, burner, and valve get cleaned and tested exactly the same way we’d handle a unit in a newer home in Teravista or Water Oak.
Trusted Brands We Service in Georgetown
We service and repair gas fireplaces from every major manufacturer, and we keep common replacement parts on hand so we can finish most Georgetown jobs in one visit. If you have a HeatShield resurfaced smoke chamber, a Gelco top-mounted damper, or a Copperfield chimney cap, we install, service, and repair those same brands. We don’t stock knock-off components or “universal” parts that sort of fit. When your limestone chimney in old Georgetown needs a specific connector or a specific refractory panel, we order from the manufacturer or a recognized chimney-trade supplier, and we tell you the lead time before we order, not after.
Common Fireplace Repair Problems We See in Georgetown Homes
- Spalling limestone fireboxes in Old Town and historic districts. Georgetown limestone is soft and porous, and decades of heat cycling plus Central Texas clay soil movement causes the face of the brick or stone to flake off in sheets. We patch and stabilize these with limestone-matched mortar before the firebox loses structural depth.
- Cracked divider walls in shared chimney stacks. In Georgetown’s older attached homes and row-style buildings, two flues often run up the same masonry stack with only a single wythe of brick or stone between them. When that divider cracks, a neighbor’s gas exhaust can push into your firebox. This is a safety issue we flag immediately and photograph thoroughly.
- Thermal shock cracks after sudden cold snaps. Central Texas winters swing from mild to freezing with little warning, and an unlined masonry chimney that’s been idle for months takes that temperature change hard. The rapid expansion and contraction opens hairline cracks in the flue wall, which grow with every burn until smoke and carbon monoxide have a route into the wall cavity.
- Hardened creosote glaze in wood-burning fireplaces. Georgetown’s long hot summers bake the creosote inside a seldom-used chimney into a shiny, tar-like coating. That glaze is harder than fresh creosote, burns hotter when it does ignite, and can’t be removed with a standard brush. We use mechanical rotary tools and chemical treatments to break it down safely before it becomes a chimney fire.
See the difference
Before
After
Before
After
Before
AfterPricing for Fireplace Repair in Georgetown, TX
Here’s what Georgetown homeowners can expect to pay. Gas fireplace repair, meaning a diagnosis plus one failed component like a thermopile or a gas valve, runs $200 to $600. A damper replacement or repair runs $180 to $450. Firebox repairs, which are the most labor-intensive because they involve cutting out damaged mortar and repointing or resurfacing, run $500 to $1,400 depending on the size of the damaged area. A full HeatShield smoke chamber resurfacing on a Georgetown fireplace usually lands between $1,200 and $2,000. Every one of these is a written quote before we start, and the price on your invoice is the price we quoted. Call (254) 274-4486 for a free estimate tailored to your fireplace.
We Also Serve Cities Near Georgetown
If you’re outside Georgetown proper, we run crews to Round Rock, Pflugerville, Taylor, and Manor on a weekly schedule. The same technicians, the same written pricing, the same guarantee you’d get on any Fireplace Repair in Georgetown call. Same phone number, same live person answering it.
Serving Georgetown, TX - Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Georgetown
You’ll see thin flakes of stone or grit gathering on the hearth, on the floor in front of the fireplace, or in the ash dump. Georgetown limestone is soft, and when it spalls, it doesn’t chip in big pieces like brick; it sheds in fine layers that look like coarse sand. Run your hand across the firebox wall, and if you feel crumbling or loose grit, the face of the stone is delaminating. We can patch it with limestone-matched mortar and stabilize the surface before the damage goes deeper. Call (254) 274-4486 and we’ll take a look; estimates are free.
Yes, and it’s more common in Georgetown’s Old Town than most people realize. If your fireplace shares a masonry stack with the unit next door, and the divider wall between your flue and theirs has cracked, their gas fireplace exhaust can be drawn into your smoke chamber and down into your living room. You’ll usually smell it as a faint gas or exhaust odor when your fireplace is off. This isn’t a routine fix; it’s a structural repair we address with a HeatShield resurfacing system and verify with camera inspection. Call us if you’re smelling anything that isn’t wood smoke.
Georgetown’s winter temperature swings are the culprit. A chimney that’s been sitting at 80 degrees in October gets hit with a 20-degree morning in December, and the mortar joints contract faster than the stone or brick around them. That differential movement opens hairline cracks. Over the next few burns, the cracks widen as heat and cold cycle through them again. If you have an older Georgetown home without a flue liner, those cracks are a direct route for heat and gases to reach combustible framing. We’ll camera the flue and show you exactly what’s cracked before recommending any liner work.
They do. The brick veneer chimneys common in Georgetown’s 1960s through 1980s ranch subdivisions off Williams Drive and Leander Road usually fail at the mortar joints first, not the brick face. Central Texas clay soil moves with seasonal moisture changes, and the chimney shifts slightly with the foundation. You’ll see stair-step cracks in the mortar, a leaning chimney stack, or a firebox that’s pulling away from the wall. Limestone chimneys in Old Town spall on the surface; brick veneer chimneys crack at the joints. The repair approach is different, and we price them differently. Both get a written quote before work starts.
Once a year, even if you only light the thing on Christmas Eve. Georgetown’s hot, humid summers are hard on a fireplace that sits idle: creosote hardens, gas valves develop residue, oven-dry mortar absorbs moisture and then dries out again, and wasps or birds find their way into uncapped flues. An annual inspection catches the idle-season damage before the first burn of winter turns it into a repair. We charge $160 to $280 for a gas fireplace service that includes the full inspection, or we’ll do a camera inspection on a wood-burning chimney as part of a sweep. Call (254) 274-4486 to get on the schedule before the cold front hits.
Schedule Your Fireplace Repair in Georgetown
If your fireplace is drafting poorly, your gas logs won’t stay lit, or you’ve got spalling limestone on the firebox and you want someone who will actually tell you what’s wrong, call us at (254) 274-4486. We’ll answer the phone, we’ll give you a straight diagnosis over the call, and we’ll put a written price in your hand before any work starts. Nathan Corliss and the Ashby Chimney Austin team have been doing this since 2002, and the Kingswell Guarantee stands behind every repair. If it’s not done right, we make it right, at no charge, inside the guarantee period. That’s the deal. Call us.
Written by Nathan Corliss, Owner at Ashby Chimney Austin, serving Georgetown since 2002.